For most signs, choose Cut to Sign Outline. Every letter sits on one sturdy piece of board that suits any mounting and nearly disappears on a light wall.
Change it only for a reason: a rectangle for a busy wall or a sign that travels, letter shape or no backboard for a plain wall and a permanent spot.
The five options, side by side
Our LED neon is silicone tube on clear acrylic as standard. The board's shape decides how much wall you see around the letters.
| Option | What you see | Best on |
|---|---|---|
| Cut to Sign Outline | One clean edge around the whole design | Most walls |
| Cut to Letter Shape | Board trimmed to each letter | Plain walls, lettering alone |
| Cut to Rectangle | A full panel, like a framed piece | Brick, tile, wallpaper, shelving |
| Clear Backboard | A transparent board, the wall shows through | A plain wall as the background |
| No Backboard | Tube on clear mounts, letters right on the wall | A permanent spot on a wall you like |
Start from the wall
- ✓ Plain, light wall. Outline cut or Clear Backboard. Clear acrylic nearly vanishes on pale paint, so the sign reads as light on the wall.
- ✓ Dark wall. Clear shows a faint edge and shine. A black board cut to the outline disappears into the paint instead.
- ✓ Busy wall. Brick, tile and pattern fight with the lettering. A rectangle in black, white or brushed gives the tube its own plain background. Mirror and brushed backboards explained compares the metal looks.
- ✗ Not clear on glass. With nothing behind it, a clear board shows off its hardware. See hanging a neon sign in a window.
The look with the power off
Unlit tube looks white (see what a neon sign looks like switched off), so the board carries the look. A rectangle in a finish stays a complete panel; a clear outline cut is mostly white tube; letter shape and no backboard leave little else. If a logo must read unlit, use the Printed Logo Backboard: your logo UV printed in full color, neon on top.
Strength and cleaning
Less board means less protection for the tube. A rectangle is the toughest, so it suits a sign that travels. An outline cut is sturdy on any wall. Letter shape has narrow parts, so hold it by the board. No Backboard is the most delicate: nothing supports the tube between its mounts.
Clean them all with a dry microfiber cloth, never glass cleaner or alcohol (see the cleaning guide). A rectangle wipes in one pass; cut letters take longer.
Which mounting suits each shape
- ✓ Hanging wires need a top edge. They hook through holes near the top of the board, so they suit a rectangle or an outline cut.
- ✓ Stand-off spacers suit any shape with a board, and the shadow behind follows the outline.
- ✓ No-drill adhesive hooks suit small, light signs. Check the weight first in how to hang a neon sign.
- ✓ A free-standing base is simplest with a rectangle, which stands straight on its bottom edge.
- ✗ No Backboard only goes on a wall. There is nothing to hang from wires or stand in a base.
Take Cut to Sign Outline unless something points elsewhere. Use a rectangle when the wall is busy or the sign will move. Choose letter shape or no backboard only for a plain wall and a permanent spot, trading strength for a lighter look. And pick the board color for your wall, not the photo.
Questions about which backboard to choose? Email service@aoos.com or call (213) 328-2667.
Frequently asked questions
What backboard shape is best for a neon sign?
Cut to Sign Outline suits most signs. Every letter sits on one sturdy piece that can hang from wires, float on spacers or go up on adhesive hooks, and clear acrylic cut this way nearly disappears on a light wall. Choose a rectangle for a busy wall or a sign that moves.
What is the difference between Cut to Sign Outline and Cut to Letter Shape?
Cut to Sign Outline follows the outer edge of the whole design, so everything stays on one piece. Cut to Letter Shape trims the board to each letter, so almost no board shows. The letter cut looks lighter; the outline cut is stronger and easier to hang.
Is a neon sign with no backboard a good idea?
It gives the cleanest look, with the tube on clear mounts right on the wall. It is also the most delicate option, and it only works fixed to a wall, never on wires or a base. Choose it for a permanent spot.
Which backboard should I use on a brick or dark wall?
On brick, tile or patterned wallpaper, use Cut to Rectangle in black, white or brushed, so the lettering has a plain background. On a dark painted wall, a black board cut to the outline disappears into the paint, where clear acrylic would show a faint edge and shine.
Can I change the backboard shape after I order?
Yes, until you approve the drawing. Changing it on the mockup is just another revision, with no limit and no fee. After approval we build from that drawing, and because the sign is made to your artwork it cannot be returned for a different shape.
We have made neon since 1998, and we still make it ourselves. If something here does not answer your question, ask us.




