Hang it on hanging wires from the window frame or the ceiling, a few inches back from the glass, facing the street, with the cord run down the side of the frame to an outlet inside.
Behind glass it is still an indoor sign. Use a black, brushed or printed board rather than clear, because the street sees it against daylight and your customers see its back.
Which way should it face?
Toward the street. A neon sign has one front, so whoever is inside sees it from behind.
Hanging it from the frame or the ceiling
Hanging wires hook through holes near the top of the board and fix above to the window head, the frame or the ceiling just inside the glass. The steps are in how to hang a neon sign from the ceiling.
- ✓ Leave a gap to the glass. A few inches lets you clean the window and keeps the sign off cold glass that fogs in winter.
- ✓ Hang it where the sidewalk sees it. Above the displays, but low enough that passers-by do not look up.
- ✓ Plan the cord first. Run it down the edge of the frame, and tell us which side the outlet is on when you order.
- ✓ Or stand a small one. A free-standing base on the sill needs no fixing at all.
- ✗ Do not stick it to the glass. It blocks the window cleaner and sits the sign on glass that fogs and drips.
Daylight, night and glare
Daylight washes out any lit sign, and a window is the brightest spot in the building. At midday people read your sign mostly by its shape and board, and the glass reflects the street over it. The board is how you fight back.
| Board | From outside by day | Our view |
|---|---|---|
| Black | Strong contrast against reflections | Best all-rounder |
| Brushed | Reads as a metal panel | Good, no mirror glare |
| Printed Logo Backboard | Your logo in full color, even unlit | Best for daytime trade |
| Clear | The room behind shows through | Avoid |
| Mirror | Reflects the sun and the traffic | Avoid |
Aim display spotlights away from the glass, since their glare sits right over your sign. After dark, a dimmer and remote let you turn it down so it does not glare at the street. At night you will also see its glow reflected back into the room. That is normal.
Indoor or outdoor sign?
Indoor, as long as it hangs inside the glass. Facing the street does not make it an outdoor sign; being in the weather does. Can a neon sign go outside covers where the line falls. Near a door that stays open or glass that runs with condensation, keep the sign back and the adapter off the sill.
What if both sides need to read?
If the inside view matters too, the honest answers are two signs, one facing each way, or a double sided light box, built to be read from both directions. Light box signs: when a box beats letters explains when a box wins. Tell us on the quote form which way people will see it.
Wires from the frame, a few inches off the glass, facing out, on a black board, dimmer within reach. If you trade mostly by day, use the Printed Logo Backboard so your name reads when the sun beats the tube. Save clear and mirror for walls. Start from the custom LED neon sign page.
Questions about a sign for your window? Email service@aoos.com or call (213) 328-2667.
Frequently asked questions
How do you hang a neon sign in a shop window?
Use hanging wires fixed to the window frame or the ceiling just inside the glass, hooked through the holes near the top of the board. Keep it a few inches off the glass, facing the street, with the cord run down the edge of the frame. A small sign can stand on the sill on a free-standing base.
Does a neon sign in a window need to be an outdoor sign?
No. Behind glass it is an indoor sign, even facing the street. You only need the IP67 outdoor build if the sign is exposed to the weather. Keep an indoor sign back from glass that gets wet with condensation.
Will the sign look backwards from inside the shop?
Yes, if it faces the street, because a sign has one front. On a clear board people inside see the letters reversed and the cable, so a solid board such as black is better: from inside it hides the letters. If both sides need to read, use two signs or a double sided light box.
Can I stick a neon sign to the window glass?
We would not. A sign stuck to the window stops you cleaning it, and cold glass fogs and drips in winter, right where the sign sits. Hang it on wires a few inches back, or stand a small one on the sill.
Why is my window sign hard to see during the day?
Daylight washes out any lit sign, and the glass reflects the street over it. A black board gives the light more contrast, and turning spotlights away from the glass removes extra glare. If your name must read at midday, the Printed Logo Backboard shows your logo in full color even unlit.
We have made neon since 1998, and we still make it ourselves. If something here does not answer your question, ask us.




