A neon sign can get close to your brand colors but cannot match them exactly, because a tube makes its own light while a Pantone or hex code describes ink or a screen. We pick the nearest of our 18 tube colors for each part of your logo.
When the exact color matters, put it in print. A Printed Logo Backboard or a backboard made in your brand color carries the color as ink, and the tube glows on top.
Why a tube cannot hit a Pantone or hex code
A Pantone number is an ink, seen by light bouncing off paper. A hex code is a mix of red, green and blue on a screen, and it looks a little different on every screen. A tube is neither. It is a light source, so you look straight at the color, glowing. Lit, it usually reads brighter and more saturated than the swatch it was matched to, and it shifts with the wall, the room lights, daylight and the camera.
Picking the nearest of the 18
For most brand colors, two tubes are in the running.
| Brand color | Tubes to compare | If the shade is critical |
|---|---|---|
| Red or burgundy | Red, Tomato | Dark red goes in print |
| Orange or coral | Orange, Tomato | Compare both |
| Yellow, gold or mustard | Lemon Yellow, Yellow, Golden Yellow | Muted and metallic golds go in print |
| Green or forest green | Green, Deep Green | Dark green goes in print |
| Teal, aqua or sky blue | Turquoise, Ice Blue | Compare both |
| Royal blue or navy | Blue, Deep Blue | Navy goes in print |
| Pink or magenta | Light Pink, Hot Pink | Compare both |
| Purple or lavender | Purple, Light Purple | Compare both |
| Black, gray, brown or silver | None | White or Warm White tube, the color on the board |
Several colors in one sign cost nothing extra, so a two color logo keeps its split. How the tubes differ is covered in neon sign tube colors and how to pick.
Lit and unlit are two different looks
Lit, the tube color is what people see. Switched off, the tube stops carrying your brand color and the board takes over, as what a neon sign looks like switched off shows. Daylight also washes out any lit sign. Both are reasons the exact brand color usually belongs on the part that does not need power.
When the exact color matters, put it in print
- ✓ A Printed Logo Backboard. Your logo is UV printed in full color with the neon on top. The colors are ink, like your brand guide, and the sign looks finished switched off. See UV printed backboards explained.
- ✓ A backboard in your brand color. Beyond the 12 stock finishes, the board can be made in any color to order. A White or Warm White tube on it is hard to get wrong.
- ✓ A halo-lit metal sign. The face of halo-lit stainless steel letters can be painted any brand color, with the light glowing onto the wall behind.
Check it on the mockup
Put your Pantone numbers or hex codes in the quote request, or attach the brand guide. The mockup names the tube chosen for each part and shows what is tube and what is print. A screen cannot show lit tube color accurately, so if two tubes were close, ask to see the other one. Revisions are unlimited and free, and nothing is built until you approve.
Do not ask the tube to be your brand color. Ask it to be the nearest glow, and put the exact color where ink can hold it: a Printed Logo Backboard for a full logo, or a board in your color for a simple wordmark. A sign that chases a Pantone in tube tends to look slightly off next to everything else you print.
Send your logo and brand colors through the quote form, or see the tube colors on the custom LED neon sign page.
Questions about matching your brand colors? Email service@aoos.com or call (213) 328-2667.
Frequently asked questions
Can a neon sign match my brand colors exactly?
Not exactly. A tube makes its own light, while Pantone and hex codes describe ink or screen color, so we match each brand color to the nearest of our 18 tube colors. When the exact shade matters, it goes on a Printed Logo Backboard or a backboard made in your brand color.
Can you match a Pantone or hex code in neon?
We use the code to pick the closest tube and name it on your mockup. The code itself cannot be reproduced in light, because Pantone describes an ink and hex a screen mix.
Why can my navy or black brand color not be made in neon?
Because anything that glows is bright. Navy, burgundy, brown, charcoal and black have no lit version, so a navy brand glows as a blue. Put the dark color in print or on the board, with the tube in White, Warm White or the nearest bright shade.
Can the backboard be my brand color?
Yes. Beyond the 12 stock finishes, the board can be made in any color to order, or your whole logo can be UV printed in full color on a Printed Logo Backboard. Either way the brand color still shows when the sign is switched off.
We have made neon since 1998, and we still make it ourselves. If something here does not answer your question, ask us.




