A logo neon sign can only be as small as its smallest part allows: no letter or detail in tube can be under about 2 inches (5 cm) tall, so the finer your logo, the larger the whole sign has to be.
A bold one word logo can stay compact. A logo with a thin script, a tagline or fine detail cannot, unless those parts move into print. Tell us the size you want and the mockup, drawn to scale, shows what fits.
The 2 inch limit
The limit applies to every part of the sign, not to the sign as a whole. A logo has a large part, usually the name or the mark, and small parts: a tagline, the lowercase letters of a script, a tiny icon in a corner. Your logo keeps its proportions at any size, so the smallest part in tube has to reach the limit, and everything else grows with it.
Why detail, not width, sets the minimum
Two logos of the same width can have very different minimum sizes. These are the parts that hit the limit first:
- ✗ Taglines and small words. Usually the smallest text in the logo by far.
- ✗ Lowercase script. In a script wordmark the lowercase letters are much shorter than the capitals, so they reach the limit first.
- ✗ Inner detail. Lines inside an icon, small enclosed shapes, the tight curls of a flourish.
- ✗ The small R and TM marks. Tiny by design, so they belong in print.
- ✓ Bold, simple marks. A heavy wordmark or a single line icon has nothing small in it, so it can be made close to the limit.
How you find out for your logo
You do not need to work anything out. Send the logo and the size you have in mind, or the space it has to fit. The mockup is drawn to scale at that size, usually the same day. If a part falls under the limit, we tell you which one and give you the choices: go larger, simplify it, move it into print, or leave it out.
Revisions are unlimited and there is no design or revision fee, so ask for the same logo at two sizes and compare. Nothing is built until you approve the drawing. To choose the size for the room in the first place, see what size neon sign do I need.
Ways to keep a logo sign small
| Option | What it does | The trade |
|---|---|---|
| Move the tagline into print | A Printed Logo Backboard carries small text in full color | Printed text does not glow |
| Simplify the mark | Fewer, bolder lines, nothing small inside | Close up, it is a simpler version of your logo |
| Use one color | Fewer separate runs of tube to fit in | The color split moves to the board |
| Use the icon or the name alone | The part you keep can be larger in the same space | Only part of the logo glows |
If the sign has to be small
Some spaces really are small: a shelf, a reception desk, a counter by the register. Plan the logo for that space rather than shrinking the full logo into it. Bend the one part people need to recognize, and let the board carry the rest.
For a desk or counter, a tabletop neon sign stands on a flat freestanding base with no tools, and runs on 8 AA batteries or plugs in. If the sign is a name rather than a logo, custom name neon signs: what fits shows how the same limit plays out with lettering.
Start from where the sign will be seen, not from the smallest size you can get away with. Then decide which part of your logo has to glow. A bold mark in tube with the fine print on a Printed Logo Backboard beats the full logo squeezed down to the limit, every small part fighting to stay readable.
Send your logo and the size you want through the quote form, and we will show you what fits.
Questions about sizing a logo sign? Email service@aoos.com or call (213) 328-2667.
Frequently asked questions
How small can a logo neon sign be?
As small as its smallest tube part allows. No letter or detail in tube can be under about 2 inches (5 cm) tall, so a bold, simple logo can be compact, while a logo with a tagline, thin script or fine detail has to be larger, or move those parts into print.
What is the smallest letter an LED neon sign can have?
About 2 inches (5 cm) tall. Below that, thin scripts and fine detail are lost. Smaller text, such as a tagline, is usually printed on the backboard instead of bent in tube.
Can my tagline be in neon on a small sign?
Usually not. The tagline is the smallest text in most logos, and it would have to reach 2 inches tall on its own, which pushes the whole sign larger. Put it on a Printed Logo Backboard instead, printed in full color under the glowing logo.
Will you tell me if my logo is too detailed for the size I want?
Yes. The mockup is drawn to scale at your size, usually the same day, and we point out any part under the limit along with the options: go larger, simplify, print it, or drop it. Revisions are unlimited and there is no design fee.
We have made neon since 1998, and we still make it ourselves. If something here does not answer your question, ask us.




