Almost any logo can be made into a neon sign, but not as an exact copy, because neon draws lines of light and most logos are built from shapes. Bold wordmarks, outlines and simple icons come through nearly untouched.
Solid fills, gradients, photos and fine detail have to change. Those parts go onto a Printed Logo Backboard, printed in full color behind the neon, and you see every change on a mockup drawn to scale before anything is built.
What happens to each part of your logo
A neon sign is built from runs of LED neon tube, each one color and one thickness. Every part of a logo becomes one of those runs or moves into print.
- ✓ Lettering. Bold or rounded type bends cleanly, letter for letter, in your own typeface.
- ✓ Outlines and line icons. They are already lines, so they are the closest thing to a direct copy.
- ✓ Solid fills, as outlines. The tube traces the edge of a filled shape, so a solid circle becomes a ring of light.
- ✓ Your colors. Each run can be a different one of our 18 tube colors, at no extra cost. For exact shades, see matching brand colors.
- ✗ Gradients, shading and photos. A tube cannot fade across an area or show an image, so those parts go to print.
- ✗ Hairlines and tight detail. Thin strokes are thickened to the width of the tube, and lines set very close together tend to merge into one band of light.
- ✗ Small text. The smallest letter tube can form is about 2 inches (5 cm) tall, so taglines usually move to print. See how small a logo neon sign can be.
Which logos convert well, and which need work
| Your logo | In tube | What we usually do |
|---|---|---|
| A wordmark in a bold font | Converts directly | Bend it letter for letter |
| A line icon or monogram | Converts directly | Trace it as drawn |
| A filled badge or shape | Becomes an outline | Outline in tube, fill printed |
| A detailed crest or mascot | Needs simplifying | Key lines in tube, the rest printed |
| A photo, gradient or 3D effect | Cannot be tube | Print it, with tube around it |
| A thin script with a tagline | Depends on size | Script in tube, larger, tagline printed |
When print does the heavy lifting
On a Printed Logo Backboard your logo is UV printed in full color on the board, and the neon sits on top, tracing the parts that should glow. Switched off, the sign still shows the whole logo, which matters for a business sign that hangs unlit outside opening hours. UV printed backboards explained covers how print looks behind the tube.
The real decision is which parts glow, usually the name and the outline of the mark. A few strong runs of light over a printed logo read better than a busy logo bent line for line.
What we do in the mockup
Send the logo as it is. File types are covered in sending a logo for a neon sign, and for a hand sketch, see turning a drawing into a neon sign.
We redraw every part as a tube path, to scale, at the size you asked for. The mockup marks which parts are tube and which are print, and flags anything under the 2 inch limit or likely to blur when lit. It usually comes back the same day, changes are unlimited, and there is no design, artwork or revision fee. Nothing is built until you approve it, so push back there on anything that changed.
Stop asking whether your logo can be made in neon and ask which part of it should glow. For most business logos that is the name and the outline of the mark in tube, with everything else on a Printed Logo Backboard. The logo stays whole, lit or unlit, and the tube only does what tube is good at.
Have your logo ready? Upload it for a free mockup, or see the options on the custom LED neon sign page.
Questions about turning your logo into a sign? Email service@aoos.com or call (213) 328-2667.
Frequently asked questions
Can any logo be made into a neon sign?
Almost any, but not as an exact copy. Lettering, outlines and simple icons convert directly. Solid fills become outlines, and gradients, photos and fine detail move to a printed backboard. You see every change on the mockup first.
What happens to the filled parts of my logo in neon?
The tube traces the edge of a filled shape, so a solid circle becomes a ring of light. If the fill is part of the brand, it is printed in full color on a Printed Logo Backboard behind the tube, so the shape stays filled and the outline glows.
Can a neon sign show a gradient or photo from my logo?
Not in tube. Each run of tube is one color, so shading, photos and 3D effects are printed on the backboard instead. A two color gradient along the tube can be built to order, but it blends two tube colors rather than reproducing your artwork.
Will my logo still be recognizable when the sign is off?
On a Printed Logo Backboard, yes. The full color logo is printed on the board, so the sign looks finished even switched off. On a clear board only the tube carries the design, which suits a simple wordmark best.
We have made neon since 1998, and we still make it ourselves. If something here does not answer your question, ask us.




