Care

Guides in LED Neon Sign Guides covering care.

How to Hang a Neon Sign from the Ceiling with a Cable Kit
How to Hang a Neon Sign from the Ceiling with a Cable Kit

Hanging a neon sign from the ceiling takes nine steps: mark two points at the same spacing as the holes in the sign, ...

Free Standing LED Neon Signs: Making One Stand on the Floor
Free Standing LED Neon Signs: Making One Stand on the Floor

A free standing sign needs no wall fixing at all, which makes it the answer for rentals, venues that forbid drilling,...

Drilling for a Neon Sign: Which Bit and Which Wall
Drilling for a Neon Sign: Which Bit and Which Wall

Drywall takes a 6 mm bit and a plastic plug. Brick, block or concrete needs a masonry bit and a hammer drill. Tile ne...

How to Photograph Your Neon Sign
How to Photograph Your Neon Sign

Turn the sign down, not up, and shoot at dusk with a little room light on. A sign at full brightness in a dark room b...

How an LED Neon Sign Is Packed and Shipped
How an LED Neon Sign Is Packed and Shipped

Foam cut to the shape of the sign, inside a double-wall carton, with the accessories in their own compartment. Nothin...

Can an LED Neon Sign Go Outside?
Can an LED Neon Sign Go Outside?

Yes, but only if it is built as an outdoor sign from the start. The outdoor build is a paid option adding about 25 pe...

How to Clean and Look After an LED Neon Sign
How to Clean and Look After an LED Neon Sign

Switch it off, wipe it with a dry or barely damp microfiber cloth, and otherwise leave it alone. That is the entire m...

Hanging a Neon Sign Without Drilling
Hanging a Neon Sign Without Drilling

Yes. Most signs under about 3 kg hang on heavy-duty adhesive strips, and every sign ships with hanging chain and clea...

How to Hang a Neon Sign
How to Hang a Neon Sign

Weight decides the method, not preference. A 60 by 30 cm sign is about 1.5 kg, a 90 by 45 cm about 3.4 kg, and a 120 ...

LED Neon Sign Troubleshooting: Why It Stopped Working
LED Neon Sign Troubleshooting: Why It Stopped Working

Most LED neon faults are the power supply, a loose connector, or water at a joint - not the tube. The flexible LED tu...